FastHub8FastHub16Dual Speed Ethernet HubsInstallation GuidePN 613-10783-00 Rev B
Product Description4Uplink Switch. The slide switch located on the right side of the back panel is for the uplink function. To use Port 8 as an Uplink
5Chapter 2InstallationThe hub does not require software configuration, and is ready to work by simply attaching the cables and power adapter. This cha
Installation6Placing the HubYou can wall mount a single LanEdge product, place it on a desktop, or interlock two or more to form a single unit that oc
FastHub8 and FastHub16 Installation Guide7To Interlock a Group of LanEdge Products on a DesktopThe interlocking feature of the LanEdge products makes
Installation84. Pry off the interlock cap at each corner of the unit. Refer to Figure 4. From the side of the unit, insert the tip of a small straight
FastHub8 and FastHub16 Installation Guide9Powering on the HubApply power to the FastHub8 and FastHub16 as follows:1. Plug the power cord into the AC p
Installation10Connecting CablesThe FastHub8 and FastHub16 have 8 and 16 ports on the back panel, respectively. If the port is connected but the Link/A
11Chapter 3TroubleshootingNo PowerIf the Power LED is OFF, check the following to isolate the problem:❑Make sure the AC/DC adapter is properly connect
Troubleshooting12100M LEDIf the 100M LED for the port does not indicate the correct speed, check the following:❑If the port is auto-negotiating, wait
13Appendix AFastHub8 and FastHub16 SpecificationsTable 2 Technical SpecificationsStandard IEEE 802.3, 10Base-T and IEEE 802.3u 100Base-TX Class I and
Copyright 1999 Allied Telesyn International, Corp.960 Stewart Drive Suite B, Sunnyvale CA 94086 USAAll rights reserved. No part of this publication m
15Appendix BLanEdge FastHub8 and FastHub16 Installation Guide FeedbackPlease tell us what additional information you would like to see discussed in th
17Appendix CTechnical Support Fax OrderName________________________________________________________________________Company____________________________
19Appendix DWhere To Find UsFor Technical Support or ServiceLocation Phone FaxAmericasUnited States, Canada, Mexico, Central America, South America1 (
iiiFCC Compliance StatementThis device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:1. The device may
vTable of ContentsFCC Compliance Statement...iiiChapter 1Product Descriptio
1Chapter 1Product DescriptionThe LanEdge FastHub8 and FastHub16 are 10/100 Mbps dual speed hubs for small or medium business applications. With 8 or 1
Product Description2The Front and Back PanelsFigure 1 and Figure 2 show the front and back panels of the hub. Figure 1 FastHub8 Front and Back Panels
FastHub 8 and FastHub 16 Installation Guide3Front Panel LEDsPower. Indicates that the hub is receiving power and is operational.Collision 10M/100M. Ea
Commentaires sur ces manuels